308 Bras


308 Brass |Lapua .308 Brass|.308 Brass |.308 Winchester.

308 Brass (pronounced: “three-oh-eight”) is a rimless, bottlenecked rifle cartridge and is the

commercial cartridge from which the 7.62×51mm NATO round was derived. The .308 Winchester

was introduced in 1952, two years prior to the NATO adoption of the 7.62×51mm NATO T65.

Winchester branded the cartridge and introduced it to the commercial hunting market as the

.308 Winchester. Winchester’s Model 70 and Model 88 rifles were subsequently chambered for

the new cartridge. Since then, the .308 Winchester has become the most popular short-action,

big-game hunting cartridge worldwide It is also commonly used for civilian hunting, target shooting,

metallic silhouette, bench rest target shooting, metal matches, military sniping, and police sharpshooting.

308 Bras, Reloading Brass For Sale, .308 Bras,

.308 Winchester, Lapua .308 Brass.

Reloading Suppliers | 223 Brass .

The Reloading Suppliers, 223 Brass, .308 Brass, relatively short case makes the .308 Winchester especially

well-adapted for short-action rifles. When loaded with a bullet that expands, tumbles, or fragments in tissue,

this cartridge is capable of high terminal performance. 308 Bras, Reloading Brass For Sale, .308 Bras,

.308 Winchester, Lapua .308 Brass.

On non-plated brass, you may also notice all the anneal stain might not be polished off,

which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case

mouths to be slightly belled. Lapua .308 Brass.

Reloading Suppliers | 223 Brass | .308 Brass | Reloading Brass For Sale.

Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are

“out of round” or slightly dented below the shoulder.  These imperfections occur in the final

tumbling wash operation after the case mouth has been annealed.  Brass manufacturers are

aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting

may still occur.  Minor dents are normally removed in the first firing and will not affect case life

or performance.

With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur

the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and

let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate

the case neck inside the case mouth, Reloading Suppliers ,223 Brass, .308 Brass.

Product Information

Cartridge 300 Winchester Magnum
Finish Brass
Condition New
Quantity 100 Piece
Primed No


There are no reviews yet.

Be the first to review “308 Bras”

Your email address will not be published.


Your Cart is Empty

Back To Shop